SERVPRO knows the Science of Drying.
Did you know, there is actually a science behind the process of drying? The knowledge of psychrometrics is essential to restoring a water damaged structure to its preloss condition. While your initial reaction may be to grab a few towels to mop up the mess and place a fan or two around the damaged area, SERVPRO of Romulus/Taylor professional team is trained in the science if drying and follow strict industry-approved standards to help lower the chances of any secondary damages. If your business suffers a water damage, SERVPRO of Romulus/ Taylor professionals will:
- Inspect the building to detect every component that is wet, to help prevent secondary damage from happening.
- Measure how much moisture is in wet materials and monitor whether the materials are drying properly.
- Speed up Mother Nature by using professional drying equipment.
What exactly does “Speed up Mother Nature” mean? A wet building can often dry naturally because the environment always seeks equilibrium. When materials are wet, moisture will naturally move to drier air is, indeed, drier. The only problem is, nature takes too long and secondary damages may occur while the building is drying out.
SERVPRO of Romulus/Taylor has been trained to use top-of-the-line equipment to help Mother Nature along, including equipment to help dry hardwood floors, tough-to-reach spaces inside walls, and much more. SERVPRO of Romulus/Taylor also uses state-of-the-art monitoring equipment, and proven scientific process to help speed the drying of your home or business.
The bottom line? SERVPRO of Romulus/Taylor has the training and equipment to help make it “Like it never even happened.”
What should you know about Mold?
Summer is upon us and with it high humidity and often wet weather. These are prime conditions for the growth of mold. The following list from the U.S. Evironmental Protection Agency describes the problem and solutions.
As you can see, mold can be serious problem. Homeowners can deal with small amounts of mold; for bigger problems, call the professionals at SERVPRO. We are experienced, trained, and we have solutions for you mold problem.
Mold can cause health effects.
There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
Fix the source of the water problem or leak to prevent mold growth.Reduce indoor humidity (to 30-60%) to decrease mold growth by:Venting bathrooms, dryers and other moisture-generating sources to the outsideUsing air conditioners and de-humidifiers
Using exhaust fans whenever cooking, dishwashing and cleaning
Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.
When do you need a mold remediation company?
Mold is a hazard that can exist in a home for months or years before being detected. Although mold might seem harmless, it is not. It is something that most homeowners cannot deal with alone. Mold can destroy a house. It is important to know when you need to contact SERVPRO.
Why You Cannot Ignore Mold in the Home
Mold can grow and slowly destroy the structure of the house. It can rot wood and drywall. It can decompose carpets. mold damage can make a home unlivable.
Removing Mold Yourself
It is tempting to think that you can deal with a mold problem yourself. This might be true if you see just a small amount on a non-porous surface like a metal fixture or a plastic bracket. Bleach can usually kill that mold. Unfortunately, if you spot mold, then there is likely much more on porous surfaces like your walls. It might even be hidden between the walls, under sinks or inside carpets. You do not want to rely on do-it-yourself solutions if you detect mold in your home.
When to Call SERVPRO
You should call a mold remediation company whenever you find a significant amount of mold in one place, or patches of mold spread throughout your house. A remediation company, like SERVPRO, will test your home for mold, seek out the source of the mold and then remove it. They can often repair or stop any mold damage. The company will be able to use special tools to find hidden mold in your home. They will remove the mold in a way so that spores are not redistributed into other rooms. It is always best to call SERVPRO when you find patches of mold in the house.
Preventative Actions to Take
After SERVPRO finishes, you can do a few things to prevent future problems. Start by ensuring your house is well ventilated to remove excess moisture. Check your insulation since it acts as a moisture barrier. Maintain a good temperature so that the air is not overly humid. If you do experience humidity problems, then run a dehumidifier during the day. These actions can slow or prevent the growth of mold.